Gå direkt till
Books
Conference contributions
Dissertations
Journals
Books
2011
Harlin, U., Gullander, P., Lundin, R. and Wandebäck, F. (2011) Framtidens Industriarbete - inspiration för utveckling av industriarbetet för ökad konkurrenskraft, Swerea IVF AB Mölndal. ISBN 978-91-86401-05-4.
2009
Harlin, U., Moestam Ahlström, L., Medbo, L., Sjögren, B., Wänström, C., Gullander, P., Hallin, M. and Sigbrandt, P.-Å. (2009) LeanNavigator – Ett dialogverktyg för utveckling av konkurrenskraftiga produktionssystem inspirerat av Lean, Swerea IVF AB, Mölndal. ISBN 978-91-89158-97-0
Conference contributions
2012
Brolin, A., Bäckstrand, G., Thorvald, P., Högberg, D. and Case, K. (2012). Kitting as an information source in manual assembly. Paper submitted to 4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012, USA, July 2012.
Thorvald, P., Bäckstrand, G., Högberg, D. and Case, K. (2012). Syntax and Sequencing of Assembly Instructions. Paper submitted to 4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012, USA, July 2012.
2011
Brolin, A., Bäckstrand, G., Högberg, D. and Case K. (2011) Inadequately Designed Information and its Effects on the Cognitive Workload, in Proceedings of the 28th International Manufacturing Conference (IMC), Dublin, Ireland, August 30 – September 1.
Brolin, A., Bäckstrand, G., Högberg, D. and Case, K. (2011) The Use of Kitting to Ease Assemblers’ Cognitive Workload, in Proceedings of the 43rd annual Nordic Ergonomics Society Conference, Oulu, Finland, September 2011, ISBN 978-951-42-9541-6.
Fässberg, T., Harlin, U., Garmer, K., Mattsson, S., Gullander, P., Davidsson, A., Dencker, K., Fasth, Å. and Stahre, J. (2011) An Empirical Study Towards a Definition of Production Complexity, In Proceedings of the 21st International Conference on Production Research (ICPR), Stuttgart, Germany, July 31 – August 4.
Gullander, P., Davidsson, A. Dencker, K. Fasth, Å. Fässberg, T. Harlin, U. and Stahre J. (2011) Towards a Production Complexity Model that Supports Operation, Re-balancing and Man-hour Planning, In Proceedings of the 4th Swedish Production Symposium (SPS), Lund, Sweden, May 3-5.
Gåsvaer, D. and von Axelson, J. (2011) Towards a methodology for Kaikaku realization, In Proceedings of the 4th Swedish Production Symposium (SPS), Lund, Sweden, May 3-5.
Harlin, U., Berglund, M., Moestam Ahlström, L. and Sjögren, B. (2011) Learning during an on-going Lean transformation in an automotive company. In Proceedings of the 28th International Manufacturing Conference (IMC), Dublin, Ireland, August 30 – September 1.
Harlin, U., Bäckstrand, B., Fässberg, T., Brolin, A. and Gullander, P. (2011) Production Complexity and its impact on Manning. In Proceedings of the 28th International Manufacturing Conference (IMC), Dublin, Ireland, August 30 – September 1.
Harlin, U., Gullander, P., Lundin, R., Wandebäck, F. and Berglund, M. (2011) Development of industrial work of the future – a study of Swedish manufacturing companies. In Proceedings of the 4th Swedish Production Symposium (SPS), Lund, Sweden, May 3-5.
Mattsson, S., Gullander, P. and Davidsson, A. (2011) Method for measuring production complexity. In Proceedings of the 28th International Manufacturing Conference (IMC), Dublin, Ireland, August 30 – September 1.
2010
Dencker, K., Mårtensson, L., Fasth, Å. and Stahre, J. (2010) “The Operator saves the day”, AHFE International 2010, Miami, USA, July 17-20.
Fasth, Å., Stahre, J. and Dencker, K. (2010) “Level of automation analysis in manufacturing systems”, presented at AHFE International 2010, Miami, USA, July 17-20.
2009
Dencker, K. and Fasth, Å. (2009) “A model for assessment of proactivity potential in technical resources”,in CIRP DET, Hong Kong, China.
Edwards, K., Dudas, K., Johansson Hanse, J., Harlin, U., Hegstad, A.-C., Holte, A.-K., Jarebrant, C., Laine, M., Møller, N., Sinervo, T., Sjøvold, E., & Winkel, J. (2009). Evaluation and development of an ergonomic complement to the Value Stream Mapping tool – a NOVO multicenter study plan. Abstract book (Ed. J. Winkel), p. 43. Presented at the 3rd NOVO Symposium, Sustainable Nordic Health Care Systems, Copenhagen, Denmark, December 9–10 2009.
Fasth, Å., Lundholm, L., Mårtensson, L., Dencker, K., Stahre, J. and Bruch, J. (2009) “Designing proactive assembly systems – Criteria and interaction between Automation, Information, and Competence.”, in the 42nd CIRP Conference on manufacturing systems, Grenoble, France, June, 3-5.
Jarebrant, C., Dudas, K., Harlin, U., Johansson Hanse, J., and Winkel, J. (2009). A tool for considering job content in the development of production flow by value stream mapping at hospitals. Abstract book (Ed.: J. Winkel), p. 42. Presented at the 3rd NOVO Symposium, Sustainable Nordic Health Care Systems, Copenhagen, Denmark, December 9–10 2009.
Jarebrant, C., Dudas, K., Harlin, U., Johansson Hanse, J. and Winkel J. (2009) Verktyg och processer för värdeskapande arbete och god arbetsmiljö inom vården - en proaktiv ansats. in Proceedings of “Arbetet i människors liv”, Institutionen för arbetsvetenskap i samarbete med Forum för arbetslivsforskning i Sverige, Göteborg, Sweden, May 13-14 2009.
Maffei, A., Dencker, K., Bjelkemyr, M. and Onori, M. (2009) “From Flexibility to Evolvability: ways to achieve self-reconfigurability and full autonomy”, in SYROCO, Gifu, Japan, September 9-12, 73-78.
2008
Berglund, M., Harlin, U. and Säfsten, K. (2008) Knowledge Gained from Product Introduction and Implications for Organizational Learning, in Proceedings of 9th International Symposium on Human Factors in Organizational Design and Management,. Editors: L. Sznelwar, F. Mascia and U. Montedo São Palo, Brazil, March 2008.
Bruch, J., Karltun, J., Johansson, C. and Dencker, K. (2008) ”A proactive assembly work setting – Information requirements”, in the 41st CIRP Conference on manufacturing systems, Manufacturing Systems for the new frontier, The University of Tokyo, Japan, May, 26-28.
Dencker, K., Stahre, J., Fasth, Å., Gröndahl, P., Mårtensson, L. and Lundholm, T. (2008) ”Characteristic of a Proactive Assembly System”, in the 41st CIRP Conference on manufacturing systems, Manufacturing Systems for the new frontier, The University of Tokyo, Japan, May, 26-28.
Fasth, Å., Stahre, J. and Dencker, K. (2008) ”Measuring and analyzing Levels of Automation in an assembly system”, in the 41st CIRP Conference on manufacturing systems, Manufacturing Systems for the new frontier, The University of Tokyo, Japan, May, 26-28.
Fasth, Å., Stahre, J. and Dencker, K. (2008) ”Analyzing changeability and time parameters due to levels of Automation in an assembly system”, in FAIM Conference on Flexible Automation and Intelligent Manufacturing, The University of Skövde, Sweden, June 30 – July 2.
Harlin, U., Moestam Ahlström, L., Medbo, L., Svenningstorp, J. (2008) A Production System Assessment Approach within Swedish Automotive Industry, in Proceedings of The Swedish Production Symposium, SPS 2008. Stockholm, Sweden
Säfsten, K., Berglund, M., Gustavsson, M., and Harlin, U. (2008) Learning and Competence Driven Product Introduction, in Proceedings of The Swedish Production Symposium, SPS 2008. Stockholm, Sweden
Säfsten, K., Harlin, U., Fjällström, S. (2008) Proactive and Reactive Ways of Managing Product Introduction, in Proceedings of The Swedish Production Symposium, SPS 2008. Stockholm, Sweden
2007
Berglund, M. and Harlin, U. (2007) Knowledge transfer during personnel changes in production, in Proceedings of the 11th International Conference on Human Aspects of Advanced Manufacturing Agility and Hybrid Automation — HAAMAHA, Poland, 9-12 July 2007.
Dencker, K., Gröndahl, P., Stahre, J., Mårtensson, L. and Lundholm, T. (2007) ”High productive Proactive Assembly Systems supported by skillful operators and appropriate automation”, in 2007 Swedish Production Symposium, Chalmers University of Technology, Gothenburg, Sweden, August, 28-30.
Dencker, K., Stahre, J., Gröndahl, P., Mårtensson, L., Lundholm, T. and Johansson, C. (2007) ”An Approach to Proactive Assembly Systems - Towards competitive assembly systems”, in 2007 IEEE International Symposium on Assembly and Manufacturing (ISAM), University of Michigan, Ann Arbor, USA, July 22-25, p 294-299.
Dencker, K., Stahre, J., Gröndahl, P., Mårtensson, L., Lundholm, T., Bruch J. and Johansson, C. (2007) ”Proactive Assembly Systems – realizing the potential of human collaboration with automation”, 2007 IFAC-CEA, Cost Effective Automation in networked Product Development and Manufacturing, Monterrey, Mexico, October, 2-5.
Granell, V., Frohm, J., Bruch, J., and Dencker, K. (2007) ”Validation of the DYNAMO methodology for measuring and assessing Levels of Automation”, in 2007 Swedish Production Symposium, Chalmers University of Technology, Gothenburg, August, 28-30.
Harlin, U., Berglund, M. and Gullander P. (2007) Critical Events and Facilitation Factors for Realization of Planned Changes In Production, in Proceedings of The Swedish Production Symposium, SPS 2007. Gothenburg, Sweden
Mellby, C., and Harlin, U. (2007) In search for progress – A pre-study of lean production transformation strategies, in Proceedings of The Swedish Production Symposium, SPS 2007. Gothenburg, Sweden
Ylipää, T. and Harlin, U. (2007) Production Disturbance Handling - A Swedish industrial survey, in Proceedings of The Swedish Production Symposium, SPS 2007. Gothenburg, Sweden
2006
Harlin, U., Frohm, J., Berglund, M. and Stahre, J. (2006) Towards Efficient Automation implementation, in Proceedings of IFAC, Symposium on Automated Systems Based on Human Skill and Knowledge, Nancy, France, 22-24 May 2006, 123-129
2005
Harlin, U., Berglund, M., Gullander, P. and Stahre, J. (2005) Information and knowledge related to production requirements during changes, in Proceedings of ICPR18, Conference on Production Research, Italy.
2004
Berglund, M., Harlin, U. and Stahre, J. (2004) Vertical information transfer in knowledge intense manufacturing, in Proceedings of the 36th Nordic Ergonomic Society Annual Conference, Norrköping, Sweden
2003
Harlin, U. and Berglund, M. (2003) Operator competence and contribution in advanced manufacturing. IFAC; 8th Symposium on Automated Systems Based on Human Skill and Knowledge. Gothenburg, Sweden
2002
Bellgran, M., Gullander, P. and Harlin, U. (2002). Towards Improvement of Production Efficiency and Effectiveness from a Life-Cycle Perspective, in Proceedings of the 33rd ISR (International Symposium on Robotics), Stockholm, Sweden.
Harlin, U., Berglund, M. and Stahre, J. (2002) Towards a Methodology for Assessment of Operator Involvement in Manufacturing Development, in Proceedings of the 34th Nordic Ergonomic Society Annual Conference, Norrköping, Sweden.
Harlin, U., Ylipää, T. and Fjällström, S. (2002) Production Disturbance Handling from an Operative Perspective in Advanced Manufacturing Systems, in Proceedings of the 34th Nordic Ergonomic Society Annual Conference, Norrköping, Sweden.
Ingemansson, A., Bolmsjö, G.S. and Harlin, U. (2002) A Survey of the Use of the Discrete-Event Simulutation in Manufacturing Industry, in Proceedings of the 10th International Manufacturing Conference in China (IMCC 2002) , Xiamen, China.
1999
Harlin, U. and Ylipää, T. (1999) Analysis of Disturbance Handling in Automated Manufacturing Systems, in Proceedings of the 15th International Conference on Production Research. Hillery, M. T. and Lewis, H. J (Eds). University of Limerick. Limerick, Ireland.
Ylipää, T. and Harlin, U. (1999) Continuous Problem Solving Based On Disturbance Experience in Dynamic Automated Manufacturing Systems, in Proceedings of the Int. Conference on TQM and Human Factors - Towards Successful Integration. Axelsson, J., Bergman, B. and Eklund, J. (Eds). Centre for Studies of Human, Technology and Organization. Linköping, Sweden.
1998
Harlin, U. and Stahre, J. (1998) Human—Machine Analysis based on Disturbances in Automated Manufacturing Systems, in Proceedings of the conference on Manufacturing Agility and Hybrid Automation. Karwowski, W. and Salvendy, G. (Eds). Santa Monica, US, IEA Press. 423-426.
Johansson, A. and Harlin, U. (1998) Balancing human aspects in Dynamic Automated Manufacturing Systems. Changing the Ways We Work - Shaping the ICT-solutions for the Next Century, in Proceedings of the Conference on Integration and Manufacturing. Mårtensson, N., Mackay, R., and Björvinsson, S. (Eds). Göteborg, Sweden. IOS Press
Johansson, A. and Harlin, U. (1998) User — centred Automation in a Car-body Assembly Plant - A case study, In Proceedings of the conference on Manufacturing Agility and Hybrid Automation. Karwowski, W. and Salvendy, G. (Eds). Santa Monica, US, IEA Press.
1997
Harlin, U. and Abrahamsson, L-Å. (1996) Industrial application of the Machine Safety Analysis Method. HAAMAHA'96.
Palo, P. and Harlin, U. (1997) Operators communication with machines/plants - a case study, IEA ´97, 13th Triennial Congress of the International Ergonomic Association.
1996
Harlin, U. and Willkrans, R. (1996) Work environment systems in smaller Swedish Companies, 25th International Congress on Occupational Health.
Dissertations
2000
Harlin, U. (2000) Towards Strategic Disturbance Management in Advanced Manufacturing Systems, Licentiate Thesis, Dept. of Human Factors Engineering. Chalmers University of Technology, Göteborg, Sweden.
Journals
2010
Fasth, Å., Bruch, J., Dencker, K., Stahre, J., Mårtensson, L. and Lundholm, T. (2010), Designing proactive assembly systems (ProAct) - Criteria and interaction between automation, information, and competence Asian International Journal of Science and Technology in production and manufacturing engineering (AIJSTPME), 2(4).
2009
Dencker, K., Stahre, J., Mårtensson, L., Fasth, Å. and Akillioglu, H. (2009) ”Proactive Assembly Systems – realizing the potential of human collaboration with automation”, Published in the Special Issue of the annual reviews in control Elsevier. 33(2), 230-237.
Fjällström, S., Säfsten, K., Harlin U. and Stahre, J. (2009) “Information enabling efficient production ramp-up,” Journal of Manufacturing Technology Management, 20(2), 178-196.