2010
Alberts, D.; Vega, V.; Pereiro, R.; … ; Bengtson, A.; Sanz-Medal, A.
In-depth profile analysis of filled alumina and titania nanostructured templates by radiofrequencey glow discharge coupled to optical emission spectrometry
Analytical and bioanalytical chemistry 396(2010):8, 2833-2840
Doostmohammadi, H.; Jönsson, P. G.; Komenda, J.; Hagman, S.
Inclusion characteristics of bearing steel in a runner after ingot casting
Steel research international 81(2010):2, 142-149
Däcker, C.-Å..
Influence of mould powder properties on shell formation in continuous casting of steels
Steel research International 81(2010).10, 899-907
Based on a presentation at the Seminar “Materials processing towards properties”, Sigtuna. June 14-15 2010
Granbom, Y.; Ryde, L.; Jeppsson, J.
Simulation of the soaking and gas jet cooling in a continuous annealing line using dilatometry
Steel research international 81(2010):2, 158-167
Hutchinson, WB; Barnett, MR
Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals
Scripta materialia 63(2010):7, 737-740
Jönsson, M.; Persson, D.
Influence of the microstructure on the atmospheric corrosion behaviour of magnesium of magnesium alloy AZ91 and AM50
Corrrosion science 52(2010):3, 1077-1085
LeBozec, N.; Thierry, D.
Influence of climatic factors in cyclic accelerated corrosion test towards the development of a reliable and repeatable accelerated corrosion test for automotive industry
Materials and corrosion 61(2010):10, 845-851
Lindell, D.; Pettersson, R. F. A.
Pickling of process – oxidised austenitic stainless steels in HNO3-HF mixed acid
Steel research international 81(2010):7, 542-551. – (TRITA-CHE-R-2010:42 Paper 2)
Lü, Y.-P.; Hutchinson, W, B.; Molodov, D. A.; Gottstein, G.
Effect of deformation and annealing on the formation and reversion of epsilon-martensite in an Fe-Mn-C alloy
Acta materialia 58(2010):8, 3079-3090
Martinsson, Å.; Andersson-Östling, H. C. M.
Effect of cold work on the creep properties of copper
33rd International symposium on scientific basis for nuclear waste management, St Petersburg, 2009
MRS symposia proceedings 1193, pr 2010, 521-528
Nazarov, A.; Thierry, D.
Influence of electrochemical conditions in a defect on the mode of paint corrosion delamination from steel surface
Corrrosion (NACE) 66(2010):2, 025004-1-10
Nowotnik, A.; Siwecki, T.
Effect of TMCP parameters on the microstructure ad mechanical properties of Ti-Nb microalloyed steel,
Journal of microscopy 237(2010):3, 258-262
Revised presentation of a paper presented at the 13th International conference on electron microscopy (EM-2008), Zakopane, June 8-11 2008
Prosek, T.,; Larché, N.; Vlot, M.; Goodwin, F.; Thierry, D.
Corrosion performance of Zn-Al-Mg coatings in open and confined zones in conditions simulating automotive applications
Materials and corrrosion (NACE) 61(2010):5, 412-420
Römhild, S.; Bergman, G.; Hedenqvist, M. S.
Short term and long term performance of thermosets exposed to water at elevated temperatures
Journal of applied polymer science 116(2010):2, 1057-1067 (TRITA-CHE-R-2010:16 Paper 3)
Sathirachinda, N.; Pettersson, R. F. A.; Wessman, S. M.; Pan, J.-S.
Study of nobility of chromium nitrides in isothermally aged duplex stainless steels by using SKPFM and SEM/EDS
Corrosion science 52 (2010):1, 179-186 (TRITA-CHE-R-2010:15 Paper 3).
Siwecki, T.; Eliasson, J.; Lagneborg, R.; Hutchinson, W. B.
Vanadium microalloyed bainitic hot strip steels
ISIJ International 50(2010):5, 760-767
Sörensen, M. H.; Ng, J.-B,; Bergström, L.; Alberius, P.-C.
Improved enzymatic activity of Thermomyces lanuginosus lipase immobilized in a hydrophobic particulate mesoporous carrier
Journal of colloid and interface science 343(2010).1, 359-365. – (TRITA-CHE-R-2009:8 Paper 4)
Arbete utfört på YKI
Vestin, F.; Randelius, M.; Bengtson, A.
Laser induced breakdown spectroscopy applied on low alloyed zinc samples
Spectrochimica acta : Pt B = Atomic spectroscopy (to be published)
24 s. (Accepted 18 April 2010)
Revised presentation of a paper presented at the 5th Euro-editerranean symposium on laser induced spectroscopy , Rom, September 28 – October 2009. - (EMSLIBS09-05)
Wessman, S. M.; Pettersson, R. F. A.; Hertzman, S.
On phase equilibria in duplex stainless steels
Steel research International 81(2010):5, 337-346. – KTH/MSE- -10/50- -SE Paper 1
Weyler, S.; Bengtson, A.
Hydrogen effect as a function of discharge parameters : investigations of the variation of emission yield in glow discharge plasmas
JAAS 25(2010):6, 849-855
Revised presentation of a paper presented at the 35th Colloquium spectroscopium internationale (CSI-35), Budapest, August 30 – September 3
2009
Wredenberg, F.; Larsson, P.-L.
On scratch testing of pressure – sensitive polymeric coatings
Journal of coatings technology and research 7(2010):3, 279-290
Arbete genomfört av FW på KTH
Wredenberg, F.; Larsson, P.-L.
On the stress distribution at scratching of thin film structures
Journal of coatings technology and research 7(2010):5, 623-635
Arbete genomfört av FW på KTH
Wredenberg, F.; Larsson, P.-L.
On the effect of substrate deformation scratching of soft thin film composites
International journal of mechanical sciences 52(2010):7, 1008-1014
Arbete genomfört av FW på KTH
2009
Barnett, M. R.; Ghaderi, A.; Sabirov, I.; Hutchinson, W. B.
Role grain boundary sliding in the anisotropy of magnesium alloys
Scripta materialia 61(2009):3, 277-280
Bengtson, A.; Björk, T.
Laser ablation breakdown spectroscopy technique for simultaneous analysisof steel and slags in metallurgical samples
Metallurgical analysis (Yejin fenxi) 29(2009):2, 8-13
Cieslik, M.; Reczynski, W.; … ; Engvall, K.; …
Metal release and formation of surface precipitate at stainless steel grade 316 and Hanks solution interface : inflammatory response and surface finishing effects
Corrosion science 51(2009):5, 1157-1162
Hedegård, J.; Wahlsten, J.; Randelius, M.; Nerman, P.; Larsson, M.
Influence of internal microfissures on fatigue life
Welding in the world 53(2009):9/10, R209-R220 (IIW-IX-2265-08)
Hutchinson, W. B,; Barnett, M. R.; Ghaderi, A.; Cizek, I.; Sabirov, I.
Deformation modes and anisotropy in magnesium alloy AZ-31
International journal of materials research 100(2009):4, 556-563
Lindwall,G.; Frisk, K.
Assessment and evaluation of mobilities for diffusion in the bcc Cr-V-Fe system
Journal of phase equilibria and diffusion 30(2009):4, 323-333
Markström, A.; Frisk, K.
Experimental and thermodynamic evaluation of the miscibility gaps in MC carbides for the C-Co-Ti-V-W-Zr system
Calphad 33(2009):3, 530-538
Mehanna, M.; Basseguy, R.; Delia, M.-L.; Gubner, R.; Sathirachinda, N.; Bergel, A.
Geobacter species enhances pit depth on 304L stainless steel in a medium lacking with electron donor
Electrochemistry communications 11(2009):7, 1476-1481
Nazarov, A. P.; Thierrry, D.
Mechanism of the corrosion exfoliation of a polymer coating from a carbon steel
Protection of metals and physical chemistry of surfaces 45(2009):6, 735-745
Pettersson, R. F. A.
Effects of composition on the corrosion of Fe-Ni-Cr alloys in chlorinating and sulfidising environments
Materials at high temperatures 26(2009):3, 217-222
Bidrag presenterat på Microscopy of oxidation : 7th International conference…, Chester 2008
Pettersson, R. F. A.; Karlsson, F.; Flyg, J.
Hot corrosion of two nickel-base superalloys under sulfate deposition conditions
Materials at high temperatures 26(2009):3, 251-257
Bidrag presenterat på Microscopy of oxidation : 7th International conference…, Chester 2008
Pettersson, R. F. A.; Storesund, J.; Nordling, M.
Corrosion of overlay weld cladding in waterwalls of waste fired CFB boiler Corrosion engineering, science and technology 44(2009):3, 218-226
Working Party 3 (High temperature corrosion processes, EUROCORR-2008)
Prosek, T., Iversen, A.; Taxén, C.; Thierry, D.
Low temperature stress corrosion cracking of stainless steels in the atmosphere in the presence of chloride deposits
Corrrosion (NACE) 65(2009):2, 105-117
Romano, A.-P.; Olivier, M.-G.; Nazarov, A.; Thierry, D.
Influence of cross linking density of a cataphoretic coating on initiation and propagation of filiform corrosion of AA6016
Progress in organic coatings 66(2009):3, 173-182
Qiu, P.; Persson, D.; Leygraf, C.
Initial oxidation of zinc induced by humidified air : a quantitified in situ study Journal of the Electrochemical Society 156(2009):3, C81-C86
Qiu, P.; Persson, D.; Leygraf, C.
Initial atmospheric corrosion of zinc induced by carboxylic acids : a quantitified in situ study
Journal of the Electrochemical Society 156(2009):3, C441-C447
Sathirachinda, N.; Pettersson, R. F. A.; Pan, J.-S.
Depletion effects at phase boundaries in 2205 duplex stainless steels characterized with SKPFM and TEM/EDS
Corrosion science 51 (2009):8, 1850-1860 (TRITA-CHE-R-2010:15 Paper 2)
Sörensen, M. H.; Samoshina, Y.; Claesson, P. M.; Alberius, P.
Sustsined release of Ibuprogen from polyelectrolyte encapsulated mesoporous carriers
Journal of dispersion science and technology 30(2009):6, 892-902. -(TRITA-CHE-R-2009:8 Paper 5) Arbete utfört på YKI
Thierry, D.; LeBozec, N.
Corrosion products formed on confined hot-dip galvanized steel in accelerated cyclic corrosion tests
Corrosion (NACE) 65(2009:11, 718-725
Viklund, P.; Pettersson, R. F. A.; Hjörnhede, A.; Henderson, P.; Sjövall, P.
Effect of sulphur containing additive on initial corrosion of superheater tubes inwaste fired boiler
Corrosion engineering, science and technology 44(2009):3, 234-240 (Working Party 3 (High temperature corrosion processes, EUROCORR-2008))
Wu, R.; Storesund, J.; Borgreen, K..
Creep properties of weld repaired low alloy heat resistant CrMo and Mo steels at 540C OMMI (ISSN 1740-5181), 6(2009):1 (13 s., elektronisk publikation) (Creep and fracture in high temperature … : 2nd International ECCC conference, Zürich 2009)
Zajac, S.; Hutchinson, W. B.; Lagneborg, R.; Korchynsky, M.
Ferrite grain refinement in seamless pipes through intergranular nucleation of VN
Metallurgia italiana 101(2009):2, 39-48
2008
Andersson-(Östling), H. C. M.; Sjöström, E.
Thermal gradients in round TMF specimens, Int J Fatig, 2008, 30, 391-396.
Bate, P. S.; Hutchinson, W. B.
Imposed stress and variant selection: the role of symmetry and initial texture, J Appl Crystallogr, 2008, 41, 210-213.
Bengtson, A.
Impact of molecular emission in compositional depth profiling using Glow Discharge-Optical Emission Spectroscopy, Spectrochim Acta B Atom Spectros, 2008, 63, 917-928.
Bratberg, J.; Ågren, J.; Frisk, K.
Diffusion simulations of MC and M7C3 carbide coarsening in bcc and fcc matrix utilising new thermodynamic and kinetic description, J Mater Sci Tech, 2008, 24, 695-704.
Chen, Z.-Y.; Persson, D.; Leygraf, C.
Initial NaCl particle induced atmospheric corrosion of zinc : effect of CO2 and SO2, Corrosion Sci, 2008, 50, 111-123.
Davies, P.; Kockelmann, W.; Wynne, B.; Eccleston, R.; Hutchinson, W. B.; Rainforth, W. M.
Validation of neutron texture data on GEM at ISIS using electron back-scattered diffraction,
Meas Sci Tech, 2008, 19, Paper 034002 (4 s.)
Frisk, K.
Thermodynamic modelling of multicomponent cubic Nb, Ti and V carbides/carbonitrides, Calphad, 2008, 32, 326-337
Frisk, K.; Markström, A.
Effect of Cr and V on phase equilibria in Co-WC based hardmetals, Int J Mat Res, 2008, 99, 287-293.
Jönsson, M.
Investigating the material world : new capabilities in the study of corrosion, Imaging and microscopy 2008, 10, 34-35.
Jönsson, M.; Persson, D.; Leygraf, C.
Atmospheric corrosion of field-exposed magnesium alloy AZ91D, Corrosion Sci, 2008, 50, 1406-1413.
LeBozec, N.; Blandin, N.; Thierry, D.
Accelerated corrosion tests in the automotive industry : a comparison of the performance towards cosmetic corrosion, Mater Corrosion, 2008, 59, 889-894.
Nazarov A.; Prosek T.; Thierry D.
Application of EIS and SKP methods for the study of the zinc/polymer interface, Electrochim Acta,
2008, 53, 7531-7538.
Pettersson, R. F. A.; Flyg, J.; Viklund, P.
Materials performance in simulated waste combustion environments, Corrosion Eng Sci Tech, 2008, 43, 123-128.
Även publicerad i acom 2010:2, 2-8
Prosek, T.; Kouril, M.; Hilbert, L. R.; Degres, Y.; Blazek, V.; Thierry, D.; Hansen, M. Q.
Real time corrosion monitoring in atmosphere using automated battery driven corrosion loggers, Corrosion Eng Sci Tech, 2008, 43, 129-133.
Prosek, T.; Nazarov, A.; Bexell, U.; Thierry, D.; Serak, J.
Corrosion mechanism of model zinc–magnesium alloys in atmospheric conditions, Corrosion Sci, 2008, 50, 2216-2231.
Safi Naqvi, S. H.; Hutchinson, W. B.; Barnett, M. R.
Texture and mechanical anisotropy of three extruded magnesium alloys, Mater Sci Tech., 2008, 24,
1283-1292.
Samie, F.; Tidblad, J.
Influence of nitric acid on atmospheric corrosion of copper, zinc and carbon steels, Corrosion Eng Sci Tech, 2008, 43, 117-122.
Sandström, R.; Andersson-(Östling), H. C. M.
Effect of phosphorus on creep in copper, J Nucl Mater. 2008, 372, 66-75.
Sandström, R.; Andersson-(Östling), H. C. M.
Creep in phosphorus alloyed copper during power-law breakdown, J Nucl Mater, 2008, 372, 76-88.
M’Saoubi, R.; Outeiro, J. C.; Chandrasekaran, H.; Dillon Jr, O. W.; Jawahir, I. S.
A review of surface integrity in machining and its impact on functional performance and life of machined products, Int J Sustain Manuf, 2008, 1, 203-236.
Sathirachinda, N.; Gubner, R. Pan, J.-S.; Kivisäkk, U.
Characterization of phases in duplex stainless steel by Magnetic Force Microscopy (MFM?) /Scanning Kelvin Probe Force Microscopy (SKPFM)
Electrochemical and solid – state letters 11(2008):7 C41-C45 (TRITA-CHE-R-2010:15 Paper 1)
Tolf, E., Hedegård, J.
Influence of reduced cooling time on the properties of resistance spot welds, Welding in the World, 2008, 2, 43-53.
Wessman, S. M.; Hertzman, S.; Pettersson, R. F. A.; Lagneborg, R.; Liljas, M.
On the effect of nickel substitution in duplex stainless steel, Mater Sci Technol, 2008, 24, 348-355.
Wynne, B.; Hutchinson, W. B.; Ryde, L.
Response to comments on “Effect of stress on transformation plasticity in a tool steel”, Scripta Mater, 2008, 58, 937-938.