Articles in collected editions
Books
Conference contributions
Dissertations
Journals
Reports
Articles in collected editions
2006
Lamminen Vihtonen, L., Wadman, B., Svinning, T., Küttner, R. (2006), Rapid Prototyping for Sheet-Metal Forming“ In: ASM Handbook 14B, Metalworking: Sheet Forming, S. L. Semiatin, ed., ASM International, Barnes Park, Ohio, 2006.
Books
2010
Holm, T., Olsson, P. and Troell, E. (red) (2010) “Stål och värmebehandling En handbok”, Swerea IVF AB, Mölndal. ISBN 978-91-86401-04-7
Conference contributions
2012
Heikkilä, I., Wadman, B., Bay, N. (2012) Clean forming of stainless and titanium products by lubricious oxides, in Proc. NordTrib 2012, Trondheim, June 12-15.
Wadman, B., Madsen, E., Schedin, E., Bay, N. and Bergström, F. (2012) Tooling Solutions for Sheet Metal Forming and Punching of Lean Duplex Stainless Steel, in Proc. of the 9th International Tooling Conference, Ed. H Leitner, Leoben, Austria, September 11-14, 621-629.
2011
Osbeck, S., Bergek, C., Klässbo, A., Thollander, P., Harvey, S. and Rhodin, P. (2011) Energy efficiency opportunities within the powder coating industry, in World Renewable Energy Congress 2011, Linköping, Sweden, May 8-13, 2011.
2010
Hosseini, S. B., Karlsson, B., Vuoristo, T. and Dalaei, K. (2010), Determination of Stresses in Medium Carbon Steel by X-rays - A Round Robin Study, in 8th European Conference on Residual Stresses (ECRS 8th), Riva Del Garda, Italy, June 26-28, 2010.
Hosseini, S. B., Sagström, E., Ottosson, P., and Troive, L. (2010) A method for measuring residual stresses in roll-formed hat profiles of ultra high-strength steel, in IDDRG2010 International Conference, Graz, Austria, May 30 – June 2, 2010.
Wadman, B., Eriksson, J. Olsson, M. Schedin, E. Madsen, E. Bay N. (2010) Influence of duplex steel surface texture on galling, in The Duplex Stainless Steel Conference, Beaune, France, Oct 13-15, 2010, pp 1211-1220.
Wadman, B., Søe Nielsen P., Wiklund, D., Bay, N., Madsen, E., Schedin, E. (2010) Tool degradation during sheet metal forming of three stainless steel alloys, in IDDRG2010 International Conference, Graz, Austria, May 30 – June 2, 2010.
Wiklund, D. (2010) Friction in sheet metal forming – a comparison between machine and manually polished surfaces, in ICPMT - The International Conference on Tribology in Manufacturing Processes, Nice, France, June 13 – 15, 2010.
2009
Ottosson, P., Wiklund, D. and Svenningsson, R., (2009) Hot Tearing during Solidification from Design of Experiments Analyzed with Response Surface Methodology, in Swerea SWECAST Design Conference, Jönköping, Sweden, December 3rd, 2009.
Lindgren, M. and Ingemarsson, L-O. (2009) 3D roll forming of a hat section with variable depth and width, in 1st International Congress on Roll forming, Bilbao, Spain, October 14 – 15, 2009.
Sagström, E. and Melander, A. (2009) Roll forming of ultra high strength steels for automotive applications, in Forming in Car Body Engineering, Bad Nauheim, Germany, September 28 – 29, 2009.
Sagström, E., Wiklund, D. and Gustafsson H. (2009) The influence of material properties on the geometry of a roll-formed hat profile, through investigation of four ultra high strength steels, in 1st International Congress on Roll forming, Bilbao, Spain, October 14 – 15, 2009.
Troell, E., Kristoffersen, H. (2009) Influence on cooling characteristics of ageing and contamination of polymer quenchants. IFHTSE Proceedings New challenges in heat treatment and surface engineering. Dubrovnik, Croatia, June, 9-12, 2009.
Wadman, B. (2009) Predicting die wear in sheet metal forming applications – an approach to reduce the total cost of dies, in Forming in Car Body Engineering, Bad Nauheim, Germany, September 28 – 29, 2009.
Wadman, B., Hallström, F., Ottosson, P., Jidah, S., Moshfegh, R. (2009) Prediction of Die Wear during High Pressure Die Casting and Sheet Metal Forming, in Tool 2009, 8th International Tooling Conference, Aachen, Germany, June, 2 – 4, 2009.
Wiklund, D., Liljengren, M., Bay, N., Kjellsson, K., Rosén, B-G. (2009) Effects of Tool die Surface Topography on Friction and Galling, in Sheet Metal Forming SPS 09 The International 3rd Swedish Production Symposium, Gothenburg, Sweden, December 2 – 3, 2009.
2008
Asnafi, N., Wadman, B. and Sagström, E. (2008) Processes & Tooling – Today & Tomorrow Key Note speech, in IDDRG 2008 International Conference, Olofström, Sweden, June 16 – 18, 2008.
Sagström, E., Lindgren, M., Moshfegh, R., Jansson, T., Wadman, B. (2008) 3D-roll forming of ultra high strength steel profiles with varying cross-sections, in Poster IDDRG 2008 International Conference, Olofström, Sweden, June 16 – 18, 2008.
Sagström, E., Wadman, B., Moshfegh, R., Lundberg, M., Melander, A. (2008) The geometrical robustness of roll formed profiles in ultra high strength steels, in IDDRG 2008 International Conference, Olofström, Sweden, June 16 – 18, 2008.
2007
Andersson, R., Moshfegh, R., Alm, P., Nilsson, A., Jansson, T., Wadman, B. (2007) Numerical simulations and experimental verification of the springback occurrence at a multi-step sheet metal forming process, in IDDRG 2007 International Conference, Győr, Hungary, May 21 – 23, 2007.
Wadman, B., Troell, E., Alm, P., Ottosson, P., Gustafsson-Ledell, S., Andersson, R., Andersson, L. (2007) Methods to decrease the cost and lead time for sheet metal forming tools, in IDDRG 2007 International Conference, Győr, Hungary, May 21 – 23, 2007.
2003
Ottosson, P. and Moshfegh, R., Hybrid Prototyping, Advanced Research in Virtual and Rapid Prototyping, VRAP, School of Technology and Management, Polytechnic Institute of Leiria, Leiria, Portugal, October 1 – 4, 2003.
Sagström, E., Troell, E., Gabrielson, P., Ingemarsson, L.-O., Wadman, B. (2003) Forming of Sheet metal at elevated temperatures, in IDDRG 2003 Conference, Bled, Slovenia, May 11 - 15, 2003.
Wadman, B., Albinsson, O., Palm, Avellan, L., Ingemarsson, L.-O., Pettersson, Lindblad, Svensson, (2003) Fluid-cell forming tools produced with different rapid prototyping methods, in IDDRG 2003 Conference, Bled, Slovenia, May 11 - 15, 2003.
Wadman, B., Sagström, E., Moshfegh, R.,Thoors, H., Jansson, Nilsson, (2003) Three sheet meal hydroforming methods, in IDDRG 2003 Conference, Bled, Slovenia, May 11 - 15, 2003.
2001
Sagström, E. and Bolmsjö, G. (2001) Decision-making for implementation of new manufacturing methods in the Swedish sheet-metal forming industry, in CIRP Design Seminar, June 2001.
Wadman, B. and Ingvarsson, L. (2001) Rollforming V-profiles of ultra high strength steels, in IDDRG Working Group Meeting, Espoo, June 11-13, 2001.
1999
Sagström, E., Larsson, H., Nilsson, B., Wadman, B. (1999) The Formability of Tailored-Welded Blanks Depending on Welding Methods and Material Combinations, in IDDRG Congress, Ann Arbor, June 1999.
Troell, E., Strand, N. (1999) Life Cycle Assessment of Quenching Fluids, in 3rd International Conference on Cooling & Control of Distortion, ASM International, Prague, Czech Republic, 24-26 March 1999.
1998
Troell, E., Segerberg, S., Holm, T. (1998) Cold Chamber Gas Cooling for Low Pollution Hardening. Proc. 18th ASM Heat treating Society Conf. & Expo. Rosemont, Illinois, USA, 12-15 Oct 1998 and the 11th Congress of the Internat. Federation for Heat Treatment and Surface Engineering, Florence, Italy 19-21 Oct 1998
1996
Segerberg, S., Troell, E. (1996) The consequences of changing to alternative quenchants in heat treatment-materials, equipment and facilities, safety and environment. Proceedings of the 16th Conference, Cincinnati, Ohio, USA, 19-21 Mar 1996.
Dissertations
2012
Stormvinter, A. (2012) Low Temperature Austenite Decomposition in Carbon Steels, Ph.D. thesis, KTH Royal Institute of Technology, Stockholm.
2011
Bergek, C. (2011) Energy efficiency opportunities within the powder coating industry - Energy audit and pinch analysis, Master´s Thesis within the Sustainable Energy Systems programme, Chalmers University of Technology, Göteborg, Sweden.
Osbeck, S. (2011) Energieffektivisering vid ytbehandlingsprocesser: - en fallstudie av LaRay AB, Master´s Thesis within the Mechanical Engineering Programme, Linköping University, Sweden.
2009
Ångström, A. (2009) Resurseffektivisering vid värmebehandlingsprocesser, Master thesis, Luleå tekniska universitet, Sweden.
2006
Moshfegh, R., (2006) Aspects on finite element simulation of sheet metal forming processes, Linköping Studies in Science and Technology, Dissertations No. 1042, Linköping University, Sweden.
Journals
2012
Sterley, M., Trey, S., Lundevall, Å., Olsson, S. (2012), “Influence of cure conditions on the properties of a one-component moisture-cured polyurethane adhesive in the context of green gluing of wood” Journal of Applied Polymer Science, 126 (S1), E297-304.
2001
Billur, E., Demiralp, Y. Groseclose, A.R., Wadman, B. and Altan, T. (2011) “Factors Affecting the Accuracy of Flow Stress determined by the Bulge Test”, Steel research International, Special Edition 10th International Conference on Technology of Plasticity, 726-732.
2010
Hosseini, S. B., Karlsson, B., Vuoristo, T. and Dalaei, K. (2010), “Determination of Stresses and Retained Austenite in Carbon Steels by X-rays - A Round Robin Study”, Experimental Mechanics. DOI: 10.1007/s11340-010-9338-2
2008
Moshfegh, R., Nilsson, L. and Larsson, M. (2008) “Estimations of process parameters variations in a pre-defined process window using Latin Hypercube method” Structural and Multidisciplinary Optimization, 35(6), 587-600.
1997
Segerberg, S., Troell, E. (1997) “High-pressure Gas Quenching using a Cold Chamber to Increase Cooling Capacity”, IVF Heat Treatment of Metals 1, 21-24.
Reports
2000
Svensson, T., Wadman, B. and de Maré, J. (2000) Determination of the fatigue limit, methods and problems, ITM Report 2000:2.